Under Floor Heating with eFloor Plus - Floorspan Contracts
7534
page-template-default,page,page-id-7534,page-child,parent-pageid-3356,ajax_fade,page_not_loaded,boxed,,qode-title-hidden,footer_responsive_adv,qode-content-sidebar-responsive,qode-theme-ver-11.1,qode-theme-hyber custom,elementor-default,elementor-page elementor-page-7534

Under Floor Heating

Underfloor heating is becoming more popular in the construction industry. Underfloor heating is a greener and ultimately cost-effective way of heating a home. Not only is this appealing to the consumer, it is also a boon for contractors who are under pressure to produce homes that are more energy efficient. This makes underfloor heating a natural companion to thermally efficient, EPS based flooring systems such as eFloor Plus.

Underfloor heating (UFH) is a highly efficient form of space heating. It generates heat through electric or hydronic heating elements embedded beneath the surface of the floor.

CAD drawing of Under Floor Heating with beam and block

Why use Under Floor Heating

Underfloor heating emits a higher proportion of its heat as radiant heat in the lower, occupied part of the room, not up at the ceiling.  This is much more comfortable to the body, and therefore the heat is concentrated where it is required.

The humidity is higher so the room will not become stuffy, and as the heat is even over the whole area of the floor, there are no cold draughts.

Under Floor Heating is much more efficient than the conventional way of heating a building with the use of radiators. Underfloor heating is efficient because it effectively turns the whole floor into a radiator. The large surface area means it doesn’t have to be a high temperature to warm the room – only a couple of degrees warmer than normal room temperature. It uses 15-40% less energy than traditional radiators.

One of the other problems with radiators is that they are limited by where they are placed. Both in terms of heat emission and furniture arrangement.

Underfloor heating gives total freedom to decorate a room and does not use up wall space.  Decorating is simpler – there are no radiators to paint, and wallpapering is easier.

Under floor Heating and Screed

Apart from serving as a level surface to receive the final floor finish, a good screed plays the important role of conducting the heat evenly across the surface of the floor, without any hot or cold spots.

A good quality screed, laid to the right depth helps to retain the heat for longer hours, reducing the energy required at the source and improving the energy efficiency of the UFH system.

The heating elements for the underfloor heating are normally encased in a layer of screed before the installation of the final floor covering. Traditional sand and cement screeds are often used for screeding over underfloor heating. Other self levelling and ‘flow’ screeds are also growing in popularity.

ground workers spreading cement onto efloor insulated flooring

Types of Screed

Traditional Screed

Fast Drying Screed

Anhyydrate Screeds

Cement and sand is mixed with water and mixed with reinforcing fibers or other microfibers for increasing strength and to reduce cracking

This type of screed have additives mixed with cement and sand to improve the drying time. The additives may come ready-mixed or can be site mixed as per requirement.

Unlike the usual screeds, this screed is composed of a mixture of calcium sulphate, sand and water, and is liquid inconsistency. These screeds have the advantage of being easy to install and level as the liquid can be poured quickly to cover a larger area.

Why use Under Floor Heating with eFloor

EPS is an emerging technology in the industry and as such there is a degree of uncertainty regarding its compatibility with UFH. eFloor plus combines well with Under Floor Heating.

When designing homes with energy efficiency in mind, using UFH in conjunction with eFloor Plus makes a lot of sense.  eFloor Plus can achieve very low U-Values meaning that it has much better heat transfer properties than traditional beam and block or concrete slab. So, while UFH is efficient at heating a dwelling, eFloor Plus holds the heat in for as long as possible.

Installation is straight forward. eFloor Plus’ top sheet is suitable for clipping the pipes onto and the reinforced screed can then be laid over the top. If a damp-proof membrane is required alongside the under-floor heating- this can be laid between the beams and the top sheet layer to avoid penetrating the membrane.

All in all, oversheet thermal flooring is well-matched with all major UFH systems and installation is simple.

The combination of eFloor plus and UFH works well with the required structural concrete screed and we can offer advice on the appropriate type and depth for your project.

If you would like to learn more about eFloor Plus or how to use alongside UFH, please get in contact and we will be happy to help.

Beams. Blocks. Solutions.

Get your free quote. we go the extra mile to provide value.